RUTM50 – Router 5G industrial (USA)

Descripción

El RUTM50 es un router industrial bajo tecnología 5G especialmente adecuado para comunicaciones de alta velocidad y demanda de tráfico. Gracias a disponer de dual SIM, 5 puertos Gigabit y dual-band Wi-Fi permite transferencia de datos con una muy baja latencia.

Al igual que el resto de dispositivos, el RUTM50 viene equipado con el RutOS, un sistema operativo propio de Teltonika que proporciona funcionalidades avanzadas en seguridad, incorpora protocolos industriales como Modbus, MQTT entre otro y es compatible con la plataforma Remote Management System (RMS) para acceso remoto y monitorización de grandes volúmenes de dispositivos.

MOBILE

• Mobile module5G Sub-6 GHz SA, NSA 2.4, 3.4Gbps DL (4×4 MIMO) 900, 550Mbps UL (2×2 MIMO); 4G (LTE): DL Cat 19 1.6Gbps (4×4 MIMO), UL Cat 18 200Mbps
• SIM switch2 SIM cards, auto-switch cases: weak signal, data limit, SMS limit, roaming, no network, network denied, data connection fail, SIM idle protection
• StatusIMSI, ICCID, operator, operator state, data connection state, network type, CA indicator, bandwidth, connected band, signal strength (RSSI), SINR, RSRP, RSRQ, EC/IO, RSCP, data sent/received, LAC, TAC, cell ID, ARFCN, UARFCN, EARFCN, MCC, and MNC
• SMSSMS status, SMS configuration, send/read SMS via HTTP POST/GET, EMAIL to SMS, SMS to EMAIL, SMS to HTTP, SMS to SMS, scheduled SMS, SMS autoreply, SMPP
• USSDSupports sending and reading Unstructured Supplementary Service Data messages
• Black/White listOperator black/white list (by country or separate operators)
• Multiple PDNPossibility to use different PDNs for multiple network access and services
• Band managementBand lock, Used band status display
• SIM idle protection serviceWhen working with devices with two SIM slots, the one not currently in use will remain idle until the device switches to it, meaning that no data is used on the card until then
• APNAuto APN
• BridgeDirect connection (bridge) between mobile ISP and device on LAN
• PassthroughRouter assigns its mobile WAN IP address to another device on LAN
• Framed routingFramed routing: support an IP network behind 5G UE

WIRELESS

• Wireless mode802.11b/g/n/ac Wave 2 (Wi-Fi 5) with data transmission rates up to 867 Mbps (Dual Band, MU-MIMO)
• Wi-Fi securityWPA2-Enterprise – PEAP, WPA2-PSK, WPA-EAP, WPA-PSK, WPA3-SAE, WPA3-EAP, OWE; AES-CCMP, TKIP, Auto-cipher modes, client separation, EAP-TLS with PKCS#12 certificates, disable auto-reconnect
• SSID/ESSIDESSID stealth mode
• Wi-Fi usersUp to 150 simultaneous connections
• Wireless Connectivity FeaturesWireless mesh (802.11s), fast roaming (802.11r), Relayd, BSS transition management (802.11v), radio resource measurement (802.11k)
• Wireless MAC filterWhitelist, blacklist
• Wireless QR code generatorOnce scanned, a user will automatically enter your network without needing to input login information. 

ETHERNET

• WAN1 x WAN port 10/100/1000 Mbps, compliance with IEEE 802.3, IEEE 802.3u, 802.3az standards, supports auto MDI/MDIX crossover
• LAN4 x ETH ports, 10/100/1000 Mbps, supports auto MDI/MDIX crossover

NETWORK

• RoutingStatic routing, Dynamic routing (BGP, OSPF v2, RIP v1/v2, EIGRP, NHRP), Policy based routing
• Network protocolsTCP, UDP, IPv4, IPv6, ICMP, NTP, DNS, HTTP, HTTPS, FTP, SMTP, SSL v3, TLS, ARP, VRRP, PPP, PPPoE, UPNP, SSH, DHCP, Telnet, SMPP, SNMP, MQTT, Wake On Lan (WOL)
• VoIP passthrough supportH.323 and SIP-alg protocol NAT helpers, allowing proper routing of VoIP packets
• Connection monitoringPing Reboot, Wget Reboot, Periodic Reboot, LCP and ICMP for link inspection
• FirewallPort forward, traffic rules, custom rules
• Firewall status pageView all your Firewall statistics, rules, and rule counters
• Ports managementView device ports, enable and disable each of them, turn auto-configuration on or off, change their transmission speed, and so on
• Network topologyVisual representation of your network, showing which devices are connected to which other devices
• HotspotCaptive portal (hotspot), internal/external Radius server, Radius MAC authentication, SMS authorisation, internal/external landing page, walled garden, user scripts, URL parameters, user groups, individual user or group limitations, user management, 9 default customisable themes and optionality to upload and download customised hotspot themes
• DHCPStatic and dynamic IP allocation, DHCP relay, DHCP server configuration, status, static leases: MAC with wildcards
• QoS / Smart Queue Management (SQM)Traffic priority queuing by source/destination, service, protocol or port, WMM, 802.11e
• DDNSSupported >25 service providers, others can be configured manually
• Network backupWi-Fi WAN, Mobile, VRRP, Wired options, each of which can be used as an automatic Failover
• Load balancingBalance Internet traffic over multiple WAN connections
• SSHFSPossibility to mount remote file system via SSH protocol
• VRF supportInitial virtual routing and forwarding (VRF) support

SECURITY

• AuthenticationPre-shared key, digital certificates, X.509 certificates, TACACS+, Radius, IP & login attempts block, time-based login blocking, built-in random password generator
• FirewallPre-configured firewall rules can be enabled via WebUI, unlimited firewall configuration via CLI; DMZ; NAT; NAT-T
• Attack preventionDDOS prevention (SYN flood protection, SSH attack prevention, HTTP/HTTPS attack prevention), port scan prevention (SYN-FIN, SYN-RST, X-mas, NULL flags, FIN scan attacks)
• VLANPort and tag-based VLAN separation
• Mobile quota controlMobile data limit, customizable period, start time, warning limit, phone number
• WEB filterBlacklist for blocking out unwanted websites, Whitelist for specifying allowed sites only
• Access controlFlexible access control of SSH, Web interface, CLI and Telnet

VPN

• OpenVPNMultiple clients and a server can run simultaneously, 27 encryption methods
• OpenVPN EncryptionDES-CBC 64, RC2-CBC 128, DES-EDE-CBC 128, DES-EDE3-CBC 192, DESX-CBC 192,BF-CBC 128, RC2-40-CBC 40, CAST5-CBC 128, RC2-64-CBC 64, AES-128-CBC 128, AES-128-CFB 128, AES-128-CFB1 128, AES-128-CFB8 128, AES-128-OFB 128, AES-128-GCM 128, AES-192-CFB 192, AES-192-CFB1 192, AES-192-CFB8 192, AES-192-OFB 192, AES-192-CBC 192, AES-192-GCM 192, AES-256-GCM 256, AES-256-CFB 256, AES-256-CFB1 256, AES-256-CFB8 256, AES-256-OFB 256, AES-256-CBC 256
• IPsecIKEv1, IKEv2, with 14 encryption methods for IPsec (3DES, DES, AES128, AES192, AES256, AES128GCM8, AES192GCM8, AES256GCM8, AES128GCM12, AES192GCM12, AES256GCM12, AES128GCM16, AES192GCM16, AES256GCM16)
• GREGRE tunnel, GRE tunnel over IPsec support
• PPTP, L2TPClient/Server instances can run simultaneously, L2TPv3, L2TP over IPsec support
• StunnelProxy designed to add TLS encryption functionality to existing clients and servers without any changes in the program’s code
• DMVPNMethod of building scalable IPsec VPNs
• SSTPSSTP client instance support
• ZeroTierZeroTier VPN client support
• WireGuardWireGuard VPN client and server support
• TincTinc offers encryption, authentication and compression in it’s tunnels. Client and server support.
• TailscaleTailscale offers speed, stability, and simplicity over traditional VPNs. Encrypted point-to-point connections using the open source WireGuard protocol

OPC UA

• Supported modesClient, Server
• Supported connection typesTCP

MODBUS

• Supported modesServer, Client
• Supported connection typesTCP, USB
• Custom registersMODBUS TCP custom register block requests, which read/write to a file inside the router, and can be used to extend MODBUS TCP Client functionality
• Supported data formats8-bit: INT, UINT; 16-bit: INT, UINT (MSB or LSB first); 32-bit: float, INT, UINT (ABCD (big-endian), DCBA (little-endian), CDAB, BADC), HEX, ASCII

DATA TO SERVER

• ProtocolHTTP(S), MQTT, Azure MQTT
• Data to serverExtract parameters from multiple sources and different protocols, and send them all to a single server

MQTT GATEWAY

• Modbus MQTT GatewayAllows sending commands and receiving data from MODBUS Server through MQTT broker

DNP3

• Supported modesStation, Outstation
• Supported connectionTCP, USB

DLMS

• DLMS SupportDLMS – standard protocol for utility meter data exchange

MONITORING & MANAGEMENT

• WEB UIHTTP/HTTPS, status, configuration, FW update, CLI, troubleshoot, multiple event log servers, firmware update availability notifications, event log, system log, kernel log, Internet status
• FOTAFirmware update from server, automatic notification
• SSHSSH (v1, v2)
• SMSSMS status, SMS configuration, send/read SMS via HTTP POST/GET
• CallReboot, Status, Mobile data on/off, Output on/off, answer/hang-up with a timer, Wi-Fi on/off
• TR-069OpenACS, EasyCwmp, ACSLite, tGem, LibreACS, GenieACS, FreeACS, LibCWMP, Friendly tech, AVSystem
• MQTTMQTT Broker, MQTT publisher
• SNMPSNMP (v1, v2, v3), SNMP Trap
• JSON-RPCManagement API over HTTP/HTTPS
• RMSTeltonika Remote Management System (RMS)

IOT PLATFORMS

• Cloud of ThingsAllows monitoring of: Device data, Mobile data, Network info, Availability
• ThingWorxAllows monitoring of: WAN Type, WAN IP, Mobile Operator Name, Mobile Signal Strength, Mobile Network Type
• CumulocityAllows monitoring of: Device Model, Revision and Serial Number, Mobile Cell ID, ICCID, IMEI, Connection Type, Operator, Signal Strength, WAN Type and IP
• Azure IoT HubCan send device IP, Number of bytes send/received, Temperature, PIN count to Azure IoT Hub server, Mobile connection state, Network link state, IMEI, ICCID, Model, Manufacturer, Serial, Revision, IMSI, SIM State, PIN state, GSM signal, WCDMA RSCP, WCDMA EC, IO, LTE RSRP, LTE SINR, LTE RSRQ, CELL ID, Operator, Operator number, Connection type, Temperature, PIN count to Azure IoT Hub server

SYSTEM CHARACTERISTICS

• CPUMediaTek, Dual-Core, 880 MHz, MIPS1004Kc
• RAM256 MB, DDR3
• FLASH storage16MB serial NOR flash, 256MB serial NAND flash

FIRMWARE / CONFIGURATION

• WEB UIUpdate FW from file, check FW on server, configuration profiles, configuration backup
• FOTAUpdate FW
• RMSUpdate FW/configuration for multiple devices at once
• Keep settingsUpdate FW without losing current configuration
• Factory settings resetA full factory reset restores all system settings, including the IP address, PIN, and user data to the default manufacturer’s configuration

FIRMWARE CUSTOMISATION

• Operating systemRutOS (OpenWrt based Linux OS)
• Supported languagesBusybox shell, Lua, C, C++, and Python, Java in Package manager
• Development toolsSDK package with build environment provided
• GPL customizationYou can create your own custom, branded firmware and web page application by changing colours, logos, and other elements in our firmware to fit your or your clients’ needs.

LOCATION TRACKING

• GNSSGPS, GLONASS, BeiDou, Galileo and QZSS
• CoordinatesGNSS coordinates via WebUI, SMS, TAVL, RMS
• NMEANMEA 0183
• NTRIPNTRIP protocol (Networked Transport of RTCM via Internet Protocol)
• Server softwareSupported server software TAVL, RMS
• GeofencingConfigurable multiple geofence zones

USB

• Data rateUSB 2.0
• ApplicationsSamba share, USB-to-serial
• External devicesPossibility to connect external HDD, flash drive, additional modem, printer, USB-serial adapter
• Storage formatsFAT, FAT32, exFAT, NTFS (read-only), ext2, ext3, ext4

INPUT / OUTPUT

• Input1 x Digital Input, 0 – 6 V detected as logic low, 8 – 50 V detected as logic high
• Output1 x Digital Output, Open collector output, max output 50 V, 300 mA
• EventsEmail, RMS, SMS
• I/O jugglerAllows to set certain I/O conditions to initiate event

POWER

• Connector4-pin industrial DC power socket
• Input voltage range9 – 50 VDC, reverse polarity protection, surge protection >51 VDC 10us max
• PoE (passive)Possibility to power up through LAN1 port, not compatible with IEEE802.3af, 802.3at and 802.3bt standards, Mode B, 9 – 50 VDC
• Power consumptionIdle: <5 W, Max: <18 W

PHYSICAL INTERFACES

• Ethernet5 x RJ45 ports, 10/100/1000 Mbps
• I/O’s1 x Digital Input, 1 x Digital Output on 4-pin power connector
•  Status LEDs3 x connection status LEDs, 3 x connection strength LEDs, 10 x Ethernet port status LEDs, 4 x WAN status LEDs, 1 x Power LED, 2 x 2.4G and 5G Wi-Fi LEDs
• SIM2 x SIM slots (Mini SIM – 2FF), 1.8 V/3 V
• Power1 x 4-pin power connector
• Antennas4 x SMA for Mobile, 2 x RP-SMA for Wi-Fi, 1 x SMA for GNNS
• USB1 x USB A port for external devices
• ResetReboot/User default reset/Factory reset button
• Other
   1 x Grounding screw

PHYSICAL SPECIFICATION

• Casing materialAluminium housing
• Dimensions (W x H x D)132 x 44.2 x 95.1 mm
• Weight519 g
• Mounting optionsDIN rail, wall mount, flat surface (all require additional kit)

OPERATING ENVIRONMENT

• Operating temperature-40 °C to 75 °C
• Operating humidity10% to 90% non-condensing
• Ingress Protection RatingIP30

REGULATORY & TYPE APPROVALS

• RegulatoryFCC, IC, PTCRB, UL/CSA Safety, NOM
• OperatorT-Mobile, AT&T (FirstNet)

EMC EMISSIONS & IMMUNITY

• Standards47 CFR Part 15 Subpart BICES-003: Issue 7 (October 2020)

RF

• Standards (Wi-Fi 2.4 GHz, 5 GHz)47 CFR Part 15 Subpart C – § 15.247, Subpart E – § 15.407RSS-247 Issue 2 (February 2017), RSS-Gen Issue 5 (April 2018) Amendment 2 (February 2021)KDB 905462 D02 UNII DFS Compliance Procedures New Rules v02KDB 905462 D04 Operational Modes for DFS Testing New Rules v01
• Standards (4G, 5G)47 CFR Part 2, Part 22 Subpart H, Part 24 Subpart E, Part 27 Subpart C, Part 90 Subpart R/S, Part 96RSS-130 Issue 2 (February 2019), RSS-132 Issue 3 (January 2013), RSS-133 Issue 6 (January 2018) Amendment, RSS-139 Issue 3 (July 2015), RSS-140 Issue 1 (April 2018), RSS-192 Issue 4 (May 2020), RSS-195 Issue 2 (April 2014), RSS-197 Issue 1 (February 2010), RSS-199 Issue 3 (December 2016), RSS-Gen Issue 5 (April 2018) Amendment 2SRSP-503 Issue 7 (September 2008), SRSP-510 Issue 5 (February 2009), SRSP-513 Issue 3 (July 2015), SRSP-516 Issue 1 (April 2014), SRSP-517 Issue 1 (July 2014), SRSP-518 Issue 2 (February 2019), SRSP-520 Issue 2 (November 2021)

RF EXPOSURE

• Standards47 CFR – § 2.1091KDB 447498 D04 Interim General RF Exposure Guidance v01RSS-102 Issue 5 (March 2015) Amendment 1