OTD500 – Router 5G para espacios exteriores con eSIM
515,46€ con IVA - 426,00€ sin IVA
El router para espacios exteriores OTD500 cuenta con una carcasa de plástico IP55 específica y duradera y un soporte de montaje integrado, lo que hace que este router 5G de exterior sea fácil de desplegar y capaz de soportar las condiciones ambientales exteriores. Además, este router de exterior está equipado con conectividad LTE Cat 19 y 3G, compatibilidad con RMS para capacidades de gestión remota y dos puertos Ethernet PoE-in/out.
Mobile module5G Sub-6Ghz SA/NSA 2.4/3.4Gbps DL (4×4 MIMO), 900/550 Mbps UL (2×2); 4G LTE – LTE Cat 19 1.6Gbps DL/200Mbps UL; 3G up to 42 Mbps DL/5.76Mbps UL
3GPP ReleaseRelease 16
eSIMConsumer type eSIM, profile download and removal operations, up to 7 eSIM profiles; does not include data plans
SIM switch2 SIM cards, auto-switch cases: weak signal, data limit, SMS limit, roaming, no network, network denied, data connection fail, SIM idle protection
StatusIMSI, ICCID, operator, operator state, data connection state, network type, bandwidth, connected band, signal strength (RSSI), SINR, RSRP, RSRQ, EC/IO, RSCP, data sent/received, LAC, TAC, cell ID, ARFCN, UARFCN, EARFCN, MCC, and MNC
SMSSMS status, SMS configuration, send/read SMS via HTTP POST/GET, EMAIL to SMS, SMS to EMAIL, SMS to HTTP, SMS to SMS, scheduled SMS, SMS autoreply, SMPP
USSDSupports sending and reading Unstructured Supplementary Service Data messages
Black/White listOperator black/white list (by country or separate operators)
Band managementBand lock, Used band status display
SIM idle protection serviceWhen working with devices with two SIM slots, the one not currently in use will remain idle until the device switches to it, meaning that no data is used on the card until then
SIM PIN code managementSIM PIN code management enables setting, changing, or disabling the SIM card’s PIN
APNAuto APN
BridgeDirect connection (bridge) between mobile ISP and device on LAN
PassthroughRouter assigns its mobile WAN IP address to another device on LAN
Framed routingFramed routing: support an IP network behind 5G UE
Ethernet
ETHERNET2 x ETH ports (can be configured as WAN), 10/100/1000 Mbps, compliance with IEEE 802.3, IEEE 802.3u, 802.3az standards, supports auto MDI/MDIX crossover
POE IN
PoE ports1 x PoE In
PoE standards802.3af/at
POE OUT
PoE ports1 x PoE Out
PoE standards802.3af Alternative B
PoE Max Power per Port (at PSE)15 W Max (power supply unit dependent)
Firewall status pageView all your Firewall statistics, rules, and rule counters
Ports managementView device ports, enable and disable each of them, turn auto-configuration on or off, change their transmission speed, and so on
Network topologyVisual representation of your network, showing which devices are connected to which other devices
DHCPStatic and dynamic IP allocation, DHCP relay, DHCP server configuration, status, static leases: MAC with wildcards
QoS / Smart Queue Management (SQM)Traffic priority queuing by source/destination, service, protocol or port, WMM, 802.11e
DDNSSupported >25 service providers, others can be configured manually
DNS over HTTPSDNS over HTTPS proxy enables secure DNS resolution by routing DNS queries over HTTPS
Network backupVRRP, Wired options, each of which can be used as an automatic Failover
Load balancingBalance Internet traffic over multiple WAN connections
HotspotCaptive portal (hotspot), internal/external Radius server, Radius MAC authentication, SMS authorisation, SSO authentication, internal/external landing page, walled garden, user scripts, URL parameters, user groups, individual user or group limitations, user management, 9 default customisable themes and optionality to upload and download customised hotspot themes
SSHFSPossibility to mount remote file system via SSH protocol
VRF supportInitial virtual routing and forwarding (VRF) support
Traffic ManagementReal-time monitoring, wireless signal charts, traffic usage history
Security
AuthenticationPre-shared key, digital certificates, X.509 certificates, TACACS+, Internal & External RADIUS users authentication, IP & login attempts block, time-based login blocking, built-in random password generator
FirewallPreconfigured firewall rules can be enabled via WebUI, unlimited firewall configuration via CLI, DMZ, NAT, NAT-T, NAT64
PPTP, L2TPClient/Server instances can run simultaneously, L2TPv3, L2TP over IPsec support
StunnelProxy designed to add TLS encryption functionality to existing clients and servers without any changes in the program’s code
DMVPNMethod of building scalable IPsec VPNs, Phase 2 and Phase 3 and Dual Hub support
SSTPSSTP client instance support
ZeroTierZeroTier VPN client support
WireGuardWireGuard VPN client and server support
TincTinc offers encryption, authentication and compression in it’s tunnels. Client and server support.
TailscaleTailscale offers speed, stability, and simplicity over traditional VPNs. Encrypted point-to-point connections using the open source WireGuard protocol
OPC UA
Supported modesClient, Server
Supported connection typesTCP
MODBUS
Supported modesServer, Client
Supported connection typesTCP
Custom registersMODBUS TCP custom register block requests, which read/write to a file inside the router, and can be used to extend MODBUS TCP Client functionality
Data to serverExtract parameters from multiple sources and different protocols, and send them all to a single server; Custom LUA scripting, allowing scripts to utilize the router’s Data to server feature
MQTT Gateway
Modbus MQTT GatewayAllows sending commands and receiving data from MODBUS Server through MQTT broker
DNP3
Supported modesStation, Outstation
Supported connectionTCP
DLMS
DLMS SupportDLMS – standard protocol for utility meter data exchange
Supported modesClient
Supported connection typesTCP
COSEMAllows to scan meter COSEM objects for automatic detection and configuration
API
Teltonika Networks Web API (beta) supportExpand your device’s possibilities by using a set of configurable API endpoints to retrieve or change data. For more information, please refer to this documentation: https://developers.teltonika-networks.com
Monitoring & Management
WEB UIHTTP/HTTPS, status, configuration, FW update, CLI, troubleshoot, multiple event log servers, firmware update availability notifications, event log, system log, kernel log, Internet status
FOTAFirmware update from server, automatic notification
SSHSSH (v1, v2)
EmailReceive email message status alerts of various services
SMSSMS status, SMS configuration, send/read SMS via HTTP POST/GET
CallReboot, Status, Mobile data on/off, Output on/off, answer/hang-up with a timer
SNMPSNMP (v1, v2, v3), SNMP Trap, Brute force protection
JSON-RPCManagement API over HTTP/HTTPS
RMSTeltonika Remote Management System (RMS)
IoT Platforms
ThingWorxAllows monitoring of: WAN Type, WAN IP, Mobile Operator Name, Mobile Signal Strength, Mobile Network Type
Cumulocity – Cloud of ThingsAllows monitoring of: Device Model, Revision and Serial Number, WAN Type and IP, Mobile Cell ID, ICCID, IMEI, Connection Type, Operator, Signal Strength. Has reboot and firmware upgrade actions
Azure IoT HubCan be configured with Data to Server to send all the available parameters to the cloud. Has Direct method support which allows to execute RutOS API calls on the IoT Hub. Also has Plug and Play integration with Device Provisioning Service that allows zero-touch device provisioning to IoT Hubs
AWS IoT CoreUtility to interact with the AWS cloud platform. Jobs Support: Call the device’s API using AWS Jobs functionality
System Characteristics
CPUMediaTek, Dual-core, 880 MHz, MIPS1004Kc
RAM256 MB, DDR3
FLASH storage16 MB serial NOR flash, 256 MB serial NAND flash
Firmware / Configuration
WEB UIUpdate FW from file, check FW on server, configuration profiles, configuration backup
FOTAUpdate FW
RMSUpdate FW/configuration for multiple devices at once
Keep settingsUpdate FW without losing current configuration
Factory settings resetA full factory reset restores all system settings, including the IP address, PIN, and user data to the default manufacturer’s configuration
FIRMWARE CUSTOMISATION
Operating systemRutOS (OpenWrt based Linux OS)
Supported languagesBusybox shell, Lua, C, C++, and Python, Java in Package manager
Development toolsSDK package with build environment provided
GPL customizationYou can create your own custom, branded firmware and web page application by changing colours, logos, and other elements in our firmware to fit your or your clients’ needs
Package ManagerThe Package Manager is a service used to install additional software on the device
Power
ConnectorRJ45 Socket
Input voltage range42.5–57.0 VDC, reverse polarity protection, voltage surge/transient protection
Input voltage range for PoE42.5–57.0 VDC, reverse polarity protection, voltage surge/transient protection
Power consumptionIdle: < 2.5 W / Max: < 9 W / PoE Max < 24 W
Physical Interfaces
Ethernet2 x RJ45 ports, 10/100/1000 Mbps
Status LEDs3 x Mobile connection type, 3 x Mobile connection strength, 4 x ETH status LEDs
StandardsCE: EN IEC 62368-1:2020 + A11:2020, EN 62311:2020RCM: AS/NZS 62368.1:2022CB: IEC 62368-1:2018
Artículos relacionados
RUTM54 - Router 5G industrial eSIM Global Teltonika Networks Router 5G/4G/3G dual SIM y eSIM con 5 puertos Gigabit Ethernet y dual band WiFi 2.4/5GHz. Backup WAN RJ45. Global.
RUTM50 - Router 5G industrial (USA) Teltonika Networks Router 5G/4G/3G dual SIM con 5 puertos Gigabit Ethernet y dual band WiFi 2.4/5GHz. Backup WAN RJ45. Versión para USA.
RUTM52 – Router 5G dual Teltonika Networks El RUTM52 es un router 5G preparado para el futuro, diseñado para aplicaciones de misión crítica, con módems 5G duales, capacidades multi-WAN y conmutación a la red 4G LTE Cat 20
Valoraciones
No hay valoraciones aún.